Product overview

BOSD-BWF/BFF/BFM/BAM series high-voltage shunt capacitors are mainly used to improve the power factor of power system and reduce reactive power loss, and are suitable for 50Hz or 60Hz AC power systems.

Technical parameter

The continuous operating voltage is 1.0Un (100% of the rated voltage).

Steady-state overcurrent (including harmonic current) shall not exceed 1.43In (143% of rated current).

The maximum allowable capacity is 1.35Qn (135% of the rated capacity).

Main application

It is used to improve power factor, improve voltage quality and reduce equipment and line loss, and is suitable for reactive power compensation of high voltage transmission system. ?

This series of products meet the national standard GB3983.2-89 "High Voltage Shunt Capacitor" and the international standard IEC60871-1. 

Runtime environment

The altitude does not exceed 1000m, and the ambient temperature ranges from -40℃ to+40℃.

No violent mechanical vibration, harmful gas/steam, conductive/explosive dust are required for the installation site.

The altitude does not exceed 1000m, and the ambient air temperature is-40℃ ~+40℃. There is no severe mechanical vibration, harmful gas and steam, conductive and explosive dust in the installation site.

The continuous operating voltage is 1.0Un, and the maximum value of long-term overvoltage exceeds 1.1Un. Steady-state overcurrent (including harmonic current) shall not exceed 1.43In. The maximum allowable capacity shall not exceed 1.35Qn.